Specifications

Chapter 29: D-Verb 155
Chapter 29: D-Verb
D-Verb is a studio-quality reverb plug-in that is
available in TDM, RTAS, and AudioSuite for-
mats.
D-Verb Controls
D-Verb provides a variety of controls for adjust-
ing plug-in parameters.
D-Verb Output Meter
The Output meter indicates the output level of
the processed signal. With the stereo version of
D-verb, it represents the summed stereo output.
It is important to note that this meter indicates
the output level of the signal—not the input
level. If this meter clips, it is possible that the
signal clipped on input before it reached
D-Verb. Monitor your send or insert signal lev-
els closely to help prevent this from happening.
Clip Indicator The Clip indicator shows if clip-
ping has occurred. It is a clip-hold indicator. If
clipping occurs at any time during audio play-
back, the clip lights remain on. To clear the clip
indicator, click it. With longer reverb times
there is a greater likelihood of clipping occur-
ring as the feedback element of the reverb builds
up and approaches a high output level.
The TDM version of the D-Verb plug-in is
not supported at 192 kHz. Use the RTAS
version instead.
D-Verb plug-in