Specifications

Chapter 27: AIR Reverb 149
Chapter 27: AIR Reverb
AIR Reverb is an RTAS plug-in. Use the Reverb
effect to apply Reverb to the audio signal, creat-
ing a sense of room or space. Typically, you’ll
want to use Reverb on one of the Effect Send in-
serts or Main Effects inserts. This way you can
process audio from multiple Pro Tools tracks,
giving them all a sense of being in the same
space.
Reverb Controls
The Reverb plug-in provides a variety of con-
trols for adjusting plug-in parameters.
Pre-Delay
The Pre-Delay control determines the amount of
time that elapses between the original audio
event and the onset of reverberation. Under nat-
ural conditions, the amount of pre-delay de-
pends on the size and construction of the acous-
tic space, and the relative position of the sound
source and the listener. Pre-Delay attempts to
duplicate this phenomenon and is used to create
a sense of distance and volume within an acous-
tic space. Long Pre-Delay settings place the re-
verberant field behind rather than on top of the
original audio signal.
Room Size
Adjust the Room Size control to change the ap-
parent size of the space.
Reverb Time
Adjust the Reverb Time to change the rate at
which the reverberation decays after the origi-
nal direct signal stops. At its maximum value,
infinite reverberation is produced.
Reverb Editor