Specifications

Audio Plug-Ins Guide142
Processing Audio Using
X-Form
X-Form lets you change the time and pitch of se-
lected audio independently or concurrently.
To change the time of a selected audio clip:
1 Select AudioSuite > Pitch Shift > X-Form.
2 Select the Audio Type appropriate to the type
of material you are processing (Monophonic or
Polyphonic).
3 If compressing the duration of the selection,
attenuate the Gain control as necessary.
4 Adjust the Transient controls as desired.
5 Enable the desired Range button (2x, 4x, or 8x)
to set the possible range for time change.
6 Adjust the Time Shift control to the desired
amount of time change. Time change is mea-
sured in terms of the target duration using the
selected timebase or as a percentage of the orig-
inal speed.
7 Click Render.
To change the pitch of a selected audio clip:
1 Select AudioSuite > Pitch Shift > X-Form.
2 Select the Audio Type appropriate to the type
of material you are processing (Monophonic or
Polyphonic).
3 If transposing the pitch of the selection up, at-
tenuate the Gain control as necessary.
4 Adjust the Transient controls as desired.
5 Enable the desired Range button (2x, 4x, or 8x)
to set the possible range for pitch change.
6 Adjust the Pitch Shift control to the desired
amount of pitch change. Pitch change is mea-
sured in semitones (and cents) or as a percent-
age of the original pitch.
7 If desired, click the IN button to enable For-
mant and adjust the Formant control.
8 Click Render.
You can adjust both the Time Shift and
Pitch Shift controls independently before
processing.