User guide

Midi-CC / Assignment x: Sets a Midi change control (CC) to be assigned to one of a selection common
of parameters (e.g. ADSHR envelope, post-EQ, chorus mix, IR1/2 mix, gain and pan). Be aware that
automation of parameters that cause an IR to be recomputed (such as the ADSHR envelope) will
momentarily place load on the CPU.
Once a Midi-CC number has been selected Midi data must be routed to Reverberate via features in
the host application in order for it to be received and acted upon (not all hosts provide this capability
but it has been successfully tested in Cubase and Live using both VST and AU).
• Midi-CC: Provides a value in the range 0-127, Off or Auto. In Auto mode the next time
Reverberate receives any Midi-CC messages the number of the first CC received is selected
in the drop-down menu. This feature is sometimes referred to as Midi-Learn and is useful
when you do not have a list of CC controller numbers to hand and find it quicker to simply
turn a dial on a controller device and have the plug-in use this controller CC number.
• Assignment: Links a value to a parameter, or select None to remove any CC/parameter links.
IR Visualisation: Enables and disables the facility to show individual channels on the IR view page.
• Multiple: Shows selection toggles to enable the different channels of an IR to
be selected on the IR1 and IR2 tab views (shown right).
• IRx-All only: combines all IR graphs into one (default view).
Colour Scheme: Changes the colours of the interface.
• Soft green: Subtle greens based on the classic Reverberate interface.
• Neon blue: Vibrant blues and blacks.