Manny Marroquin Reverb User Guide / Owners Manual

Waves Manny Marroquin Reverb
User Guide
- 9 -
COMP controls the compressor set on the reverb path. With slow attack and fast release
times, this helps set the reverb’s dynamic placement within your mix.
Range: 0 – 100 (0 = no compression, 100 = maximum compression)
RATE determines the rate of the phaser.
Range: 0.00 Hz
– 20 Hz
PHASER determines the overall level of the phaser effect.
Range: 0 – 100
DISTORTION
determine
s the overall level of the distortion effect.
Range: 0 – 100
WET/DRY
determines the balance between the direct sign
al and the processed signal.
Use this control when using the plugin as an Insert rather then Send/Return.
Range: 0 – 100 (0 = direct signal only, 100 = processed signal only)
OUTPUT determines the plugin output level.
Range: -18 – 18 dB