Manny Marroquin Reverb User Guide / Owners Manual

Waves Manny Marroquin Reverb
User Guide
- 8 -
Please note:
It takes about one second to move from one reverb size to another. This
control is not automatable.
TIME determines the selected reverb RT60 (the time it will take the reverb to decay
by 60 dB). Time resets to 100% when Type or Size are changed.
Range: 50 – 200% (100% = original reverb time)
Please note: It takes about one second to change the reverb time. This control is not
automatable.
PREDELAY determines the amount of time before the reverb begins. For example, at a
setting of 0 milliseconds, reverb begins instantly; at a setting of 80 milliseconds, there
will be a delay of 80 milliseconds before the reverb begins.
Range: 0 – 500 milliseconds
Please note: It takes about one second to change the reverb predelay time. This control
is not automatable.
REVERB AMOUNT det
ermines the amount in the overall effect. When Reverb Amount
is set to 0, you will not hear any reve
rb, but you will hear the EQ, compression, phaser
and distortion.
Range: 0 – 100 (0 = no reverb, 100 = maximum reverb)
LOWS controls a shelf-like EQ centered around 60 Hz.
Range: -50 – 50
MIDS controls a wide bell EQ centered around 2 kHz.
Range: -50 – 50
HIGHS controls a wide shelf EQ centered around 8 kHz.
Range: -50 – 50