Manny Marroquin Delay User Guide / Owners Manual

Waves Manny Marroquin Delay
User Guide
- 9 -
VERB ON/OFF turns the reverb on or off.
Range: On, Off
DISTORTION SEND controls the level of the signal going into the distortion. Higher
levels will result in a more distorted signal.
Range: 0 – 100
DISTORTION WIDTH controls the position of the distortion in the stereo image. (0 =
mono; 100 = full stereo)
Range: 0 – 100
DISTORTION LEVEL controls the level of the distortion output.
Please note: This affects only the level of the distorted signal in the overall mix, not the
amount of the distortion.
Range: 0 – 100
DISTORTION ON/OFF turns the distortion on or off.
Range: On, Off
DOUBLER DETUNE controls the detune amount.
Range: -100 – 100 (in cents)
DOUBLER LEVEL controls the level of the doubler.
Range: 0 – 100
DOUBLER ON/OFF turns the doubler on or off.
Range: On, Off
PHASER RATE controls the modulation rate of the phaser.
Range: 0 Hz – 20 Hz
PHASER LEVEL controls the level of the phaser.
Range: 0 – 100