WAVES MANNY MARROQUIN DELAY User Guide
TABLE OF CONTENTS CHAPTER 1 – INTRODUCTION ...................................................................................... 3 1.1 WELCOME .................................................................................................................3 1.2 PRODUCT OVERVIEW ................................................................................................ 3 1.3 CONCEPTS, TERMINOLOGY & INTERFACE .................................................................. 4 1.
Chapter 1 – Introduction 1.1 Welcome Thank you for choosing Waves! In order to get the most out of your new Waves plugin, please take a moment to read this user guide. To install software and manage your licenses, you need to have a free Waves account. Sign up at www.waves.com. With a Waves account you can keep track of your products, renew your Waves Update Plan, participate in bonus programs, and keep up to date with important information.
The Manny Marroquin Signature Series consists of six plugins: Manny Marroquin EQ – A four-band equalizer, with each cutoff point inspired by a different hardware unit that Manny uses for that range. Manny Marroquin Reverb –18 of Manny’s favorite reverbs in one plugin, topped off with a bit of EQ, compression, phasing and distortion. Manny Marroquin Delay – A delay plus multi-effect plugin with phaser, reverb, distortion and harmonizer for enhanced depth and groove.
1. Delay Section includes all the controls which affect the actual delay process in the plugin 2. Effects Pallet Section includes all the controls which affect the additional effects. Signal Flow 1.4 A Few Words from Manny Marroquin “Delay is all about depth. It’s one of the key elements in almost every mix I do. Plus, it enhances the groove, and creates layers of sound which can make a mix more exciting and multi-dimensional.
1.5 Components WaveShell technology enables us to split Waves processors into smaller plugins, which we call components. Having a choice of components for a particular processor gives you the flexibility to choose the configuration best suited to your material. The Waves MannyM Delay plugin has two components: MannyM Delay – Mono-to-Stereo MannyM Delay – Stereo 1.
Chapter 2 – Controls INPUT controls the level into the plugin. Range: -18 – 18 dB MODE determines if delay time is set in milliseconds or synchronized to host tempo. Range: MS, Host DELAY L/DELAY R sets the delay time. When Host Sync mode is selected, a pull-down menu appears, enabling direct selection of the desired note duration. Ranges: MS: 0 – 2000 milliseconds (in 4 ms increments) Host mode: 1/64 Triplets – Whole Note Please note: Delay is limited to 2 seconds.
FDBK L/FDBK R determines the amount of feedback per channel. Range: 0 – 100% LINK determines whether or not channel settings are linked or independently controlled. When Link Mode is selected (On), left channel settings are applied to the right channel as well. Once linked, previous right channel settings are not restored when unlinked.
VERB ON/OFF turns the reverb on or off. Range: On, Off DISTORTION SEND controls the level of the signal going into the distortion. Higher levels will result in a more distorted signal. Range: 0 – 100 DISTORTION WIDTH controls the position of the distortion in the stereo image. (0 = mono; 100 = full stereo) Range: 0 – 100 DISTORTION LEVEL controls the level of the distortion output. Please note: This affects only the level of the distorted signal in the overall mix, not the amount of the distortion.
PHASER ON/OFF turns the phaser on or off. Range: On, Off MONITOR selects the plugin output monitoring configuration. Range: Left Side Only, Stereo, Right Side Only OUTPUT controls the plugin output level.
