User Guide

Waves IR-1 software guide page 15
IR-Series Controls and Displays
The IR-series has a large main window with controls similar to those of a standard digital
reverb. Most of the values are displayed as a ratio of the nominal value of the original IR.
The IR-360 has the most adjustable parameters, followed by the IR-1 and then the IR-L.
About the IR-L
The IR-L is essentially an IR-1 with fewer adjustable parameters. It has the same high sound
quality as the IR-1. The IR-L can be upgraded at any time to an IR-1 or IR-360.
IR-L Graph
The IR graph shows dB level on the vertical axis and time on the horizontal axis. The
range of the IR display is from 0dB at the top to –90dB at the bottom.
The scroll bar on the bottom allows you to zoom in and out horizontally as well as scroll back
and forth. Note that while IRs are limited to six seconds in length, the window itself has a
maximum length of ten seconds.
IR-1 and IR-360 users can skip to the following section labeled
“R-1 and IR-360 Controls and Displays.”