User Guide

3.2 Controls
1. Processing Sections
InPhase has two processing section
s: In Stereo
components, they are called Alpha
and Beta; in
Mono components, Alph
a and SC.
2. Process
Co
ntrols
In Stereo components, the Alpha and Beta
Process controls let us choo
se what to
process. W
hen CH1 is selected in the Alpha section, it will f
orce CH2 to the Beta
section. Th
is setup is recommended for stereo tracks or dual mono tracks such as
bass amp and bass DI.
In Stereo components, when CH1/2
is selected in the Alpha section, the sidechain
input is forced to the Beta section. This setup is recommended when processing
signals in relation to a signal routed to the plugin via sidechain.
In Mono components, the audio is f
orced to the Alpha section and the sidechain
input is forced to the Beta section. This setup is recommended when processing
signals in relation to a signal routed to the plugin via sidechain.
Please note:
In Logic and ProTools HD (TDM Mixer), sidechain functionality is not
supported due to delay compensation and timing issues.
3. Activity
LED shows when there is input sign
al activity.
4. Gain controls the level of the signal going into the processing section.
5. Phase Invert
flips the phase by 180 degrees.
6. Phase Shift Curve
Window displays the phase shift curve across th
e frequency
line, and up
dates in real time as parameters change.
Waves InPhase
User Guide
7