User Guide

223
Waves eMotion LV1 User Guide | Appendix E: Delay
Channel Strip
Master Section
FIT HARDWARE CONTROLS
Channel faders
Touch-sensitive motorized faders
Mute
Mutes the corresponding channel’s output signal.
Solo
Activates CUE or SOLO, depending on LV1 Cue channel settings.
Rotary encoder
A rotary encoder controls the channel’s preamp gain or pan. Click utility
button #1 to toggle between gain or pan (default). This toggle affects all
channels in the layer. The value and label of this control are displayed on
the scribble strip.
Scribble strip
(display changes with
controller mode)
The Scribble Strip is a five-line display that provides feedback about
channel status. Specific information changes depending on the
controller mode.
Channel Select mode
• Function of the channel select button (mapping)
• Channel name
• Channel input source
• Channel type and ID
• Function of the rotary encoder (preamp gain or pan)
In User mode, the display identifies mute groups and user assignments.
In Flip mode, Aux destination channels are identified on the top row.
Channel select
(function changes with
controller mode)
Channel select mode (default) Press to select a channel. Its button will
turn white and the function of the button will be shown at the top of the
scribble strip. An unselected channel’s button is the same color as the
corresponding channel in the LV1.
User mode (User button on) The 16 buttons are mapped as mute
groups (1–8) and user assignment keys (9–16).
Flip mode
(Flip button on)
In Flip mode, the Select buttons and the first row of scribble strips are
used to select the aux destination.
Buttons 9–11: select destination layer (EFX 1–8, MON 1–8, MON 9–16)
Buttons 1–8: select destination channel within an Aux layer
Once you select an aux destination, the faders flip. Large faders are
sending to the selected aux; the blinking Flip light indicates the mode.