Quick Start Guide

36 Emotion LV1 Mixer | Quick Start
Aux Channel “Sends on Faders”
Use the Aux layer mode to adjust aux sends from input channels, groups, and AUX/EFX.
Adjust aux sends for a mixer channel by moving the small faders. Click on the aux send number to turn the aux on and o for the
selected channel.
To make it easier to adjust aux sends, use the “Sends on Faders” mode. In this state, channel
faders no longer control channel level, but rather the level of the selected aux send on that
channel. The master fader now controls the level of the aux channel rather than the main out.
To control Aux sends with large faders
1. Select an Aux layer mode (AUX/EFX 1–8 or AUX/MON 1–8).
2. In the Sub Views section on the left, click the name of the aux channel whose sends you wish
to adjust. The mixer changes appearance to indicate that the channel faders have ipped
function. The name of the selected aux channel now appears above the master fader.
3. Use the channel fader to adjust the send at the intersection of the aux channel and the mixer
channel.
4. The master fader now maps the AUX/EFX or AUX/MON output. Use this to adjust channel
level. The Aux channel name appears above the master fader. Clicking the Cue button sends
the EFX or MON channel to the cue buss.
To return to normal faders, click on the Aux send name, either on the left side of the panel or
above the master fader.