Quick Start Guide

18 Emotion LV1 Mixer | Quick Start
STEP 3: PATCH WINDOWSET INTERNAL AND EXTERNAL ROUTING
The Patch window establishes the routing of audio within
the mixer, between the mixer and I/Os, and among devices.
> Patch stage boxes and other sources to the mixer with
SoundGrid I/Os.
> Patch mix outputs and channel direct outs to any device
on the network.
> Route audio between input channels, groups, and auxes.
> Play from another computer on a SoundGrid network.
> Patch between network devices, bypassing the mixer.
> Establish delay groups.
Patch Direction
When patching mixer inputs, the signal ow is from top to left. Mixer outputs and device-to-device connections are from left to top.
A small arrow indicates signal ow for the current Patch page.
Patching Inputs
> Select a Channel Input patch page.
> From the top of the patch section, choose the device you want to patch audio from. This reveals the devices output channels.
> Patch a device channel to a mixer input channel on the left. You can patch one I/O device output to several mixer inputs, but a
mixer input can patch to only one I/O channel.
> Each mixer channel has two inputs, A and B, which are independent of one another.