User Guide

98
Waves eMotion LV1 User Guide | Chapter 3: Channel
STEREO-TO-MONO COPY/PASTE
Copy a mono plugin module to a stereo channel and the plugin becomes a stereo module. The mono plugin’s parameters will
be applied to both sides of the stereo plugin, unless the stereo plugin has provision for split/linked processing. In such a case,
the mono plugin parameters will be the settings for the left channel.
If a stereo plugin is moved to a mono channel, then the settings of the left stereo channel become the mono parameters. The
two-channel parameters will be restored if the plugin is returned to a stereo channel.
When a mono-to-stereo plugin is pasted to a mono rack, the rack becomes stereo from that point in the signal flow onward.
ENABLE SIDECHAIN
Enables and disables the plugin’s sidechain key input when an active sidechain is patched to an appropriate plugin. Sidechain
sources are established in the Plugin Pane. Plugins with an active sidechain have a drop-down menu (S/C) that patches the
sidechain source.
ASSIGN/UNASSIGN TO THE MAIN CONTROL SECTION
Any plugin, whether from Waves or another manufacturer, that supports the LV1 Channel Main
Control section can be assigned to dynamics, EQ, or filter controls. Assigning a plugin to the Main
Control provides quick access from the Channel and Mixer windows. One plugin of each category
(dynamics, EQ, filter) can be assigned to the main Control section at the same time. An added
plugin will be assigned automatically if no other plugin of its category is present in the rack.
Plugin assignment is described in more detail later in this chapter.
Plugin Menu: Presets Section
PASTE [PLUGIN NAME] PRESET
Pastes presets from a copied plugin to another plugin in the same family (e.g., Q10 to Q6, or L1 Ultramaximizer to L1 Limiter,
etc.). This does not replace the plugin, only the presets.
The “Paste [plugin name] Preset” option is not available when the source and destination plugins are not of the same family (e.g., Q6 to
REQ 6, or H-Delay to SuperTap).