User Guide

183
Waves eMotion LV1 User Guide | Chapter 5: Show Window
Store
Updates the current snapshot and scope parameters with the current mixer condition.
Replaces the existing stored scene.
New
Creates a new scene, based on the current preset and scope settings. This makes a new
scene from the current one and serves as a “Save as” function.
Recall
Recalls the selected scene. The name of the recalled scene is displayed in the Scenes
section of the Top Bar.
Undo
Undoes the previous change. One level of undo is available.
Copy
Copies the selected scene to the clipboard. This can then be pasted back to the Scenes list
as a copy.
Paste
Pastes the copied scene to the Scenes list.
Delete
Deletes the selected scene (which is not necessarily the current scene). A deleted scene
can be recovered with the Undo function.
MIDI
Enables “scene follow program change” events for remote-controlling scene changes. A
red lamp indicates
that MIDI program changes are enabled.
Scenes List
A list of all scenes associated with the current session.
1
Scope
Sets which functions, channels, and busses will be affected when a scene is recalled.
All/None Selector
Selects/deselects all functions, channels, and busses in the Scope list.
Channel Parameters
Selectors
Determine which channel parameters can be altered with a scene change. If a control is
not in the scope
of the scene, its parameters will not change on any channel.
Input Channel, Buss,
and Link Selectors
Determine the channels, busses, and control groups included in the scope of the scene. If
a channel, buss, or link is not in the scope of the scene, then no parameters will change for
that channel.
1
Hot Scene List
User-assigned snapshots that are quickly accessible for recall. Up to eight Hot Scenes can be
recalled from the Scenes menu and user-assigned keys.
1
Notes
Each scene has its own notes section.