Quick Start Guide

34 Emotion LV1 Mixer | Quick Start
Channel Selection
Mixer controls address one selected channel. To select a channel, touch its fader or use the Channel ID box in the upper-left corner
of the Mixer and Channel windows.
Remember that only the selected channel is being controlled, even if it is not currently seen on the display. For this reason it’s
a good habit to refer to the Channel ID box to conrm that your actions are addressing the right channel.
Multiple Fader Control
The mixer interface enables you to control several faders simultaneously when using a multi-point touchscreen or an external
controller. You can move as many faders as you can touch, either as a block or while moving certain faders independently. Multi-
fader behavior on external control devices and touchscreen displays varies by manufacturer.