Quick Start Guide

30 Emotion LV1 Mixer | Quick Start
5. Set channel mix outputs (left-hand side of the Output section)
(a) Assign outputs: main stereo mix out, center, mono, matrix.
(b) Set channel level and panning/rotation.
• Pan L/R for mono signals.
• Rotate stereo images left and right.
• Change width and symmetry of stereo images.
6. Establish channel direct outs (right-hand side of the Output section)
(a) Open the Direct window to assign the channel to I/Os. Add and delete device
assignments here.
(b) Assign delay groups. This enables you to control latency compensation within
user-assigned delay groups and to delay these groups. Individual outputs can
be delayed without joining a delay group.
(c) Assign the channel to Link groups.
(d) Send channel to groups and to the output matrix.
(e) Make the channel a member of a mute group.
Channel Window: Touch-and-Slide Controller
Use the horizontal fader at the bottom of the Channel window for greater resolution when using faders and knobs.
Touch a variable controller—input or output gain, panner, imager, lter, or delays—and you can control
it from this large fader. Switches are controlled from the blue button to the right of the slider.
The name of the parameter and its current value are displayed.
The channel is now congured. Repeat this for all channels, or use the Mixer window to set multiple channels.