Quick Start Guide

27 Emotion LV1 Mixer | Quick Start
Using the Channel View
Signal ow is from left to right, so we suggest you proceed in this order:
1. Set input audio
(a) Choose the input source and I/O channel. This can also be set in the Patch window.
(b) For analog input, set phase, 48v phantom, and preamp level. Stereo preamp channel levels can be adjusted
separately or linked together. Set channel trim.
(c) Adjust lters. If lters are not available, then load a lter plugin in the Plugin Rack. See next chapter for details.
(d) Set delays to align input signals (compensating for acoustic mic distance dierences, for example). This value is
not considered in plugin delay compensation.
The Channel window controls one selected channel. From any mixer view,
use the left and right arrows beneath the Channel name to move up or
down by one channel. Or navigate directly to a channel with the drop-down
Channel menu.
In the Mixer window, touch the top channel name cell or anywhere on the
bottom part of a channel strip to select that channel.