Quick Start Guide

21 Emotion LV1 Mixer | Quick Start
Patching Between Devices
The Device-to-Device patch page is like a network patch bay. It enables you to connect between devices anywhere on the network.
I/O devices appear on both the vertical and the horizontal axes of the patch, listed in the order in which they are assigned in the
device racks. Signal ow is from left to top.
An I/O cannot the patched directly to itself.
However, this can be accomplished in the mixer:
1. Patch I/O channels to mixer inputs.
2. Patch that mixer channel’s direct out to the desired I/O device channel.
Delay Groups
Mixer outputs can be organized in delay groups. This serves two purposes:
> To allow control of latency compensation within dened groups of mixer
outputs.
> To add additional specied delays to these separate groups of channels.
The Delay Groups page shows the relationship between I/O channels and
delay groups. It provides an overview of all delay groups and displays the
delay of each. A delay group can consist of several mixer outputs, but an
individual I/O can be a member of only
one delay group.
Delay groups are discussed in detail in the User Guide, Appendix E.