Quick Start Guide

20 Emotion LV1 Mixer | Quick Start
Patching Channel Direct Outputs and Mix Outputs
Output patching works in the same manner as input patching, except that signal ow is from left to top. Examples of patches:
> Patch channel direct outs to a recorder.
> Patch mixer Main outs, FX, MON, Matrix and Cue to I/Os.
> Stream to a driver channel on another SoundGrid ASIO/Core Audio driver for remote recording or backup.
There are four send sources:
INP After input gain, before processing
PRE Pre-fader, after processing
PST Post-fader, after processing
PSP Post-fader, after panner
Click on the Source button to toggle between choices.
The mono/stereo condition of an output channel is shown here. This cannot
be changed.
Internal Routing
Connections within the mixer are made in the Internal Routing page. Patch between input channels, channel direct outs, mix outs,
groups, aux sends, and matrix.
Internal patching conventions:
> Patch audio between channels and groups, main outs, and matrix.
> Patch between groups and main outs and matrix.
> Patch main outs to the matrix.
You can also patch any channel or buss to control groups that are not audio
busses, such as links and mute groups.