User Guide

Waves Element 2.0 User Guide
11
3.2.3 VOLTAGE-CONTROLLED FILTER (VCF)
The VCF section includes selectable filter slope, frequency and resonance parameters
as well as a filter envelope which determines the filter movement on each trigger.
TYPE determines the filter type.
Options: High Pass, Low Pass, Band Pass, Band Reject
SLOPE toggles between two types of pole filters.
Options: 2-pole/12 dB per octave, 4-pole/24 dB per octave
CUTOFF controls the VCF cutoff frequency.
Range: 0–100 (20 Hz–20 kHz)
RES controls the amount of filter resonance.
Range: 0–100
ENV determines the envelope’s cutoff modulation depth.
Range: -100–100