SoundGrid Studio User Guide / Owners Manual
Table Of Contents
- Welcome to SoundGrid Studio
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Setup Window Overview
- Network Controls
- Device Racks: Assigning and Managing Network Devices
- I/O Devices Racks
- I/O Device Racks Displays and Controls
- I/O Devices Menu Items
- SG Connect
- I/O Sharing
- Connected Systems
- System Inventory in Super Systems
- Sharing a Device
- Setting up Device Sharing
- Shared Devices: Clocking Considerations
- Patching Shared Devices
- Patching Shared Output Devices
- Shared and Un-Shared Devices in the Patch
- Removing Shared Devices
- If the Sharing Host Becomes Unavailable
- Share Preamp Control
- Servers
- External Control Devices
- Setting Sample Rate
- Assigning I/O Devices Manually
- Working Offline
- Mixer Settings
- User Interface Settings Section
- Patch Window Sections
- The Patch Grid
- Mixer Layers
- Mixer Channels
- Mixer Layer Modes
- Using Plugins
- Monitor Panel
- INCORPORATING MIDI
- MACKIE CONTROL PROTOCOL
- Setting Up Mackie HUI in a DAW
- Setup Window Overview
- Part 4: Patch Window
- Part 5: Mixer Window
- Appendix
Part 3: Setup Window
SoundGrid Studio/ User Guide
37
I/O Devices Menu Items
Once an I/O device has been assigned to a rack slot, additional menu items are available.
Menu Item
Possibilities
Function
Set Master
A list of all devices that can
be used as a clock source
for the local SOE network.
Designates the device as the SOE network clock master and other devices
as clock slaves. The letter “M” and the blue text in the slot indicate that the
device is the master.
Share
Check/Uncheck
Allows sharing of I/O channels on this device with other systems.
Share Preamp
Control
Check/Uncheck
Allows remote users to control the preamps of the shared device.
Assign to SoundGrid
MIDI Driver
Check/Uncheck
Assigns any MIDI-port-equipped I/O device to the SoundGrid MIDI driver.
The device can then serve as a port for other MIDI devices. The assigned
device appears to MIDI controllers as “SG Device I/O.” Refer to the device
user guide for configuration details.
Remove
Releases the device from the local host. It will then be available to other
drivers.