SoundGrid Studio User Guide / Owners Manual
Table Of Contents
- Welcome to SoundGrid Studio
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Setup Window Overview
- Network Controls
- Device Racks: Assigning and Managing Network Devices
- I/O Devices Racks
- I/O Device Racks Displays and Controls
- I/O Devices Menu Items
- SG Connect
- I/O Sharing
- Connected Systems
- System Inventory in Super Systems
- Sharing a Device
- Setting up Device Sharing
- Shared Devices: Clocking Considerations
- Patching Shared Devices
- Patching Shared Output Devices
- Shared and Un-Shared Devices in the Patch
- Removing Shared Devices
- If the Sharing Host Becomes Unavailable
- Share Preamp Control
- Servers
- External Control Devices
- Setting Sample Rate
- Assigning I/O Devices Manually
- Working Offline
- Mixer Settings
- User Interface Settings Section
- Patch Window Sections
- The Patch Grid
- Mixer Layers
- Mixer Channels
- Mixer Layer Modes
- Using Plugins
- Monitor Panel
- INCORPORATING MIDI
- MACKIE CONTROL PROTOCOL
- Setting Up Mackie HUI in a DAW
- Setup Window Overview
- Part 4: Patch Window
- Part 5: Mixer Window
- Appendix
Part 2 Top Bar
SoundGrid Studio/ User Guide
28
TEAR-OFF WINDOWS
There are four eMotion ST windows: Mixer 1, Mixer 2, Patch, and Setup. You can “tear off” one or more windows to
spread SoundGrid Studio control over several displays. Click and drag downward, away from the Top Bar. A new
window will appear. It can be positioned on any of your displays.
The original Window Selection Panel. All window tabs are available. In this
example, we will separate the Patch window from the other windows to
create its own screen.
Drag the Patch tab off of the Top Bar. This creates a new screen containing
only the torn-off window. Move this separated window to another display.
The main display can access any window except the secondary view. Repeat
the procedure for additional displays.
Close the torn-off window to return it to the main view.