SoundGrid Studio User Guide / Owners Manual
Table Of Contents
- Welcome to SoundGrid Studio
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Setup Window Overview
- Network Controls
- Device Racks: Assigning and Managing Network Devices
- I/O Devices Racks
- I/O Device Racks Displays and Controls
- I/O Devices Menu Items
- SG Connect
- I/O Sharing
- Connected Systems
- System Inventory in Super Systems
- Sharing a Device
- Setting up Device Sharing
- Shared Devices: Clocking Considerations
- Patching Shared Devices
- Patching Shared Output Devices
- Shared and Un-Shared Devices in the Patch
- Removing Shared Devices
- If the Sharing Host Becomes Unavailable
- Share Preamp Control
- Servers
- External Control Devices
- Setting Sample Rate
- Assigning I/O Devices Manually
- Working Offline
- Mixer Settings
- User Interface Settings Section
- Patch Window Sections
- The Patch Grid
- Mixer Layers
- Mixer Channels
- Mixer Layer Modes
- Using Plugins
- Monitor Panel
- INCORPORATING MIDI
- MACKIE CONTROL PROTOCOL
- Setting Up Mackie HUI in a DAW
- Setup Window Overview
- Part 4: Patch Window
- Part 5: Mixer Window
- Appendix
Part 1: Getting Started
SoundGrid Studio/ User Guide
10
ADDITIONAL I/O DEVICES: EXPAND AS YOU NEED
Add more I/O devices Connect additional I/O devices to the
switch. Any combination of SoundGrid I/Os can be added to
the network, up to a maximum of 16, including the local driver.
If another Ethernet switch is needed, it can be connected to
the primary switch.
Add a computer Assign a driver to stream audio between studios
or to share I/Os between systems.
The sequence of the connectors to the switch is unimportant. Use
Cat 5e or better cable. Do not use Cat 5 cable and don’t “daisy
chain” devices.
Add a MIDI controller to SoundGrid Studio to control the
eMotion ST mixer with a remote device.
This configuration lets you swap and share I/O resources and
offload processing to the server.
• Cable specifications are available at Waves support.
• For descriptions and specifications of SoundGrid-compatible I/Os, servers, and Ethernet
switches, visit the Hardware Pages on the Waves website.
• The suggested display resolution is 1280x768. The mixer can accommodate one, two, or more
computer displays, depending on the host computer video capabilities.
• Learn about up-to-date minimum system requirements here.