MultiRack Setup

!
!
!
23
Source: Output Chn
Range
Use the pull-down menu to select a source device by its name (as
set in the Inventory window), i.e., the device that will send audio in
this audio connection.
Destination: Device
Name
The channels of each connection are set by ranges. Use the two
edit fields to set the range of channels the source device will send.
Note that the values are limited by the number of channels the
device supports and by your Inventory settings.
Destination: Input Chn
Range
The channels of each connection are set by ranges. Use the left
edit field to set the range of channels the destination device will
receive; the right field is display-only and will change according to
your setting in the left field. Note that the values are limited by the
number of channels the device supports and the number of
channels set in the source device (Source and Destination channel
count must match).
Please note:
• Channel settings must start with an odd number, and the connection must have an even
number of channels. For example, channel ranges can be set 1-8, 3-6, 7-14 and so on.
Connections set to 4-7, 2-11 or similar are invalid.
• Channels can be set by direct value entry or by dragging the mouse up or down.
• If a device or channel(s) used in a connection become unavailable, the connection is
automatically deactivated but is not removed.
• If, while setting up a connection, a conflict in connection arises, the connection will be
marked as invalid in red italics and will be turned off; you will not be able to apply the
window’s setting. Overlapping connections are marked blue.
14. Setting Up the SoundGrid Driver
Please refer to the Waves SoundGrid Studio User Guide.