MultiRack Setup

!
!
!
17
Remote Controller Inventory Controls and Indicators
• Assign: Selects devices that will be used in your setup. The number you assign to a
device is its index number in the Inventory list. In the case of a console, setting “1”
means it is the only console controlling MultiRack. Setting “1” and “2” means that one
console is a redundant controller.
• Console IP: Displays the IP address of each console.
• Name: Displays the console’s name as set on its interface.
• API ver: Displays the version number of the remote control protocol.
• Vendor ID: Displays the version ID of the remote controlling console.
• Status: Displays the connection status.
o N/A: Indicates that the console is not assigned or that MultiRack has not been
restarted to apply changes after assigning a console.
o Connected: Console is connected to MultiRack.
o Not Connected: Console is assigned but is not connected to MultiRack.
o Redundant pair: Console is paired with another console for control redundancy.
• ID: If this feature has been implemented on the console side, clicking this button will ping
the console and cause it to display something on its screen, allowing you to identify it.