MultiRack Setup

!
!
!
14
! Automatic – When recovery type is set to Automatic, MultiRack SoundGrid will load
the session to the server as quickly as possible.
! Manual – When recovery type is set to Manual, MultiRack SoundGrid will relaunch
itself but will not load the session to the server until you press the Connect button on
the dialog box that appears.
Enable Verbose Log: When this option is selected, MultiRack SoundGrid goes into a “debug”
mode and creates a so-called “verbose data file.” This information is used to help Waves
technical support to assess problems. When Enable Verbose Log is selected, the message
area of the Status Bar displays the flashing message, Verbose Output. The output file is titled
Debug MultiRack_date<dd.mm.yyyy>.txt.
Open in Full Screen Mode: Select this to load MultiRack SoundGrid in Full Screen mode.
Alert on a change that affects all snapshots: When this option is selected, a warning will
appear each time you attempt to modify any rack configuration. This is helpful when you are
learning the application, but may prove annoying for more seasoned users.
Load last session on application launch: Select this option to load the last opened session
on your next application launch.
External Tempo: Use to set MultiRack’s Global Tempo to chase an external sync source.
! None – When external tempo is set to None, MultiRack is not synced to an external
tempo. Instead it establishes its own BPM as set in the application top bar.
! Sync to MIDI Tempo – When external tempo is set to MIDI, MultiRack syncs to
incoming MIDI Beat Clock messages.
! Sync to Remote Controller - When external tempo is set to Remote Controller,
MultiRack will conform to the tempo setting provided by the Remote Controller that is
assigned in the Remote Control Tab.