SoundGrid Studio User Guide / Owners Manual
Table Of Contents
- Welcome to SoundGrid Studio
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Setup Window Overview
- Network Controls
- Device Racks: Assigning and Managing Network Devices
- I/O Devices Racks
- I/O Device Racks Displays and Controls
- I/O Devices Menu Items
- SG Connect
- I/O Sharing
- Connected Systems
- System Inventory in Super Systems
- Sharing a Device
- Setting up Device Sharing
- Shared Devices: Clocking Considerations
- Patching Shared Devices
- Patching Shared Output Devices
- Shared and Un-Shared Devices in the Patch
- Removing Shared Devices
- If the Sharing Host Becomes Unavailable
- Share Preamp Control
- Servers
- External Control Devices
- Setting Sample Rate
- Assigning I/O Devices Manually
- Working Offline
- Mixer Settings
- User Interface Settings Section
- Patch Window Sections
- The Patch Grid
- Mixer Layers
- Mixer Channels
- Mixer Layer Modes
- Using Plugins
- Monitor Panel
- INCORPORATING MIDI
- MACKIE CONTROL PROTOCOL
- Setting Up Mackie HUI in a DAW
- Setup Window Overview
- Part 4: Patch Window
- Part 5: Mixer Window
- Appendix
Part 5: Mixer Window
SoundGrid Studio/ User Guide
94
LINK LEFT AND RIGHT CONTROLS
When Link is selected, the left and right controls are linked for 48k phantom preamp gain (with comatible I/Os), phase reverse,
and channel trim. An existing offset between left and right will be maintained. Switches are absolute—all on or all off.
THESE CONTROLS ARE AVAILABLE WHEN USING I/OS WITH DIGITAL PREAMPS THAT CAN BE CONTROLLED REMOTELY
48
V PHANTOM POWER
Activates the microphone preamp 48v phantom power. Stereo channels have independent L/R 48v phantom controls.
INPUT PHASE POLARITY REVERSE
Reverses the polarity of an input channel. Each channel of a stereo input can be controlled separately.
P
REAMP ANALOG GAIN
Controls the analog level of an I/O device preamp. Knob position is displayed in the value box and with a blue ring around
the knob. Stereo channels have independent L/R input. Range is determined by the preamp.
CHANNEL TRIM
Trims channel input level digitally. Stereo channels/busses have independent left and right trim controls. Range: -144 dB to +10
dB