SoundGrid Studio User Guide / Owners Manual
Table Of Contents
- Welcome to SoundGrid Studio
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Setup Window Overview
- Network Controls
- Device Racks: Assigning and Managing Network Devices
- I/O Devices Racks
- I/O Device Racks Displays and Controls
- I/O Devices Menu Items
- SG Connect
- I/O Sharing
- Connected Systems
- System Inventory in Super Systems
- Sharing a Device
- Setting up Device Sharing
- Shared Devices: Clocking Considerations
- Patching Shared Devices
- Patching Shared Output Devices
- Shared and Un-Shared Devices in the Patch
- Removing Shared Devices
- If the Sharing Host Becomes Unavailable
- Share Preamp Control
- Servers
- External Control Devices
- Setting Sample Rate
- Assigning I/O Devices Manually
- Working Offline
- Mixer Settings
- User Interface Settings Section
- Patch Window Sections
- The Patch Grid
- Mixer Layers
- Mixer Channels
- Mixer Layer Modes
- Using Plugins
- Monitor Panel
- INCORPORATING MIDI
- MACKIE CONTROL PROTOCOL
- Setting Up Mackie HUI in a DAW
- Setup Window Overview
- Part 4: Patch Window
- Part 5: Mixer Window
- Appendix
Part 4: Patch Window
SoundGrid Studio/ User Guide
65
I/O DEVICE CHANNELS
Hardware and software I/O devices are represented by icons, which can appear in the horizontal and/or vertical grid
filter bars, depending on the patch view. Click on a device icon to expand its I/O channels, along with other
applicable information. Any number of available I/Os can be expanded simultaneously.
D
EVICE-TO-DEVICE MODE ROWS: I/O CHANNELS DEVICE-TO-DEVICE MODE COLUMNS: I/O CHANNELS
Name of I/O device: same as shown on the Icon
Format: analog vs. digital
Connector: mic, line, phones, AES, S/PDIF, ADAT, etc.
Channel number
Next to the device name is a series number. This indicates the device’s slot number in the Device Rack in the Setup
window.