SoundGrid Studio User Guide / Owners Manual
Table Of Contents
- Welcome to SoundGrid Studio
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Setup Window Overview
- Network Controls
- Device Racks: Assigning and Managing Network Devices
- I/O Devices Racks
- I/O Device Racks Displays and Controls
- I/O Devices Menu Items
- SG Connect
- I/O Sharing
- Connected Systems
- System Inventory in Super Systems
- Sharing a Device
- Setting up Device Sharing
- Shared Devices: Clocking Considerations
- Patching Shared Devices
- Patching Shared Output Devices
- Shared and Un-Shared Devices in the Patch
- Removing Shared Devices
- If the Sharing Host Becomes Unavailable
- Share Preamp Control
- Servers
- External Control Devices
- Setting Sample Rate
- Assigning I/O Devices Manually
- Working Offline
- Mixer Settings
- User Interface Settings Section
- Patch Window Sections
- The Patch Grid
- Mixer Layers
- Mixer Channels
- Mixer Layer Modes
- Using Plugins
- Monitor Panel
- INCORPORATING MIDI
- MACKIE CONTROL PROTOCOL
- Setting Up Mackie HUI in a DAW
- Setup Window Overview
- Part 4: Patch Window
- Part 5: Mixer Window
- Appendix
Part 3: Setup Window
SoundGrid Studio/ User Guide
57
Setting Maximum Latency
The Server Network Buffer is the amount of time it takes for audio to
stream from the I/O to the server and back. This determines the
maximum latency for a processing route.
Internal Routing latency is determined by the number of paths that are
necessary to complete a route. The more paths, the greater the latency,
and usually the larger the Server Network Buffer must be. Set the
Server Network Buffer size in the Server rack.
Mixer Startup
Determines the startup condition of the mixer.
Previous Session Loads the last session to its most recent user save.
Last State Loads the most recent session to its last state before quitting.
This is the file created by the auto-save routine, as described below.
Empty Session The mixer opens with a blank session.
History
Enables automatic saving of the current SoundGrid Studio session as a History file. Set the frequency of auto saves
with the drop-down menu. Save interval: 3–30 minutes.
History files are recalled in the Show window. All SoundGrid Studio session files use the .sgst extension. These files
are the same format as user-saved sessions, but are stored in a separate folder:
Windows
Users\Public\WavesAudio\SGS\history
Mac
/User/Shared/Waves/SoundGrid Studio/history
The mixer stores an unlimited number of auto-saved files. Auto-save files are not deleted; new saves do not replace
old saves. Delete session files using the host computer.