SoundGrid Studio User Guide / Owners Manual
Table Of Contents
- Welcome to SoundGrid Studio
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Setup Window Overview
- Network Controls
- Device Racks: Assigning and Managing Network Devices
- I/O Devices Racks
- I/O Device Racks Displays and Controls
- I/O Devices Menu Items
- SG Connect
- I/O Sharing
- Connected Systems
- System Inventory in Super Systems
- Sharing a Device
- Setting up Device Sharing
- Shared Devices: Clocking Considerations
- Patching Shared Devices
- Patching Shared Output Devices
- Shared and Un-Shared Devices in the Patch
- Removing Shared Devices
- If the Sharing Host Becomes Unavailable
- Share Preamp Control
- Servers
- External Control Devices
- Setting Sample Rate
- Assigning I/O Devices Manually
- Working Offline
- Mixer Settings
- User Interface Settings Section
- Patch Window Sections
- The Patch Grid
- Mixer Layers
- Mixer Channels
- Mixer Layer Modes
- Using Plugins
- Monitor Panel
- INCORPORATING MIDI
- MACKIE CONTROL PROTOCOL
- Setting Up Mackie HUI in a DAW
- Setup Window Overview
- Part 4: Patch Window
- Part 5: Mixer Window
- Appendix
Part 3: Setup Window
SoundGrid Studio/ User Guide
52
External Control Devices
Use this rack to assign external controllers to the mixer.
Indicator/Menu Item
Possibilities
Function
Selected Control Category
Displays selected protocol.
Controller Device Status
Displays presence and status of device
Off>Device corresponding to the selected protocol
is not present or not functioning properly.
On > Device is present and operational.
Assess Control Panel
(Gear Button)
Switch
Opens the control panel of the selected controller.
Devices Menu
Drop-down menu listing available control
protocols
All available controller categories are listed,
whether the associated device is connected or not.
Remove
Unassigns the control protocol.
Control Panel
Each controller category has its own control panel: they all behave in a very similar manner. Please refer to the
Appendix at the end of this user guide for details about controlling the mixer with an external device.
Any mixer or plugin parameter currently being controlled by an external device is highlighted by a red bracket.