SoundGrid Studio User Guide / Owners Manual
Table Of Contents
- Welcome to SoundGrid Studio
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Setup Window Overview
- Network Controls
- Device Racks: Assigning and Managing Network Devices
- I/O Devices Racks
- I/O Device Racks Displays and Controls
- I/O Devices Menu Items
- SG Connect
- I/O Sharing
- Connected Systems
- System Inventory in Super Systems
- Sharing a Device
- Setting up Device Sharing
- Shared Devices: Clocking Considerations
- Patching Shared Devices
- Patching Shared Output Devices
- Shared and Un-Shared Devices in the Patch
- Removing Shared Devices
- If the Sharing Host Becomes Unavailable
- Share Preamp Control
- Servers
- External Control Devices
- Setting Sample Rate
- Assigning I/O Devices Manually
- Working Offline
- Mixer Settings
- User Interface Settings Section
- Patch Window Sections
- The Patch Grid
- Mixer Layers
- Mixer Channels
- Mixer Layer Modes
- Using Plugins
- Monitor Panel
- INCORPORATING MIDI
- MACKIE CONTROL PROTOCOL
- Setting Up Mackie HUI in a DAW
- Setup Window Overview
- Part 4: Patch Window
- Part 5: Mixer Window
- Appendix
Part 3: Setup Window
SoundGrid Studio/ User Guide
45
Patching Shared Devices
Patching Shared Input Devices
When a device is shared, all of its inputs are available to all users. The shared
device appears in the Patch window along with the non-shared devices.
Learn how to patch in and out of the mixer, within the mixer, and between
devices in the SoundGrid network in the next chapter, The Patch Window.
PATCHING SHARED OUTPUT DEVICES
Once assigned, a shared I/O device appears in the client’s Output Patch window. “IO Sharing, Remote
Device” is shown on its icon. Patching shared I/Os follows the same conventions as patching unshared
SOE devices. There are, however, a few considerations when sharing devices. In the example on the
next page, the device “B-IOS” is owned by System 1 and is being shared by System 2.