SoundGrid Studio User Guide / Owners Manual
Table Of Contents
- Welcome to SoundGrid Studio
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Setup Window Overview
- Network Controls
- Device Racks: Assigning and Managing Network Devices
- I/O Devices Racks
- I/O Device Racks Displays and Controls
- I/O Devices Menu Items
- SG Connect
- I/O Sharing
- Connected Systems
- System Inventory in Super Systems
- Sharing a Device
- Setting up Device Sharing
- Shared Devices: Clocking Considerations
- Patching Shared Devices
- Patching Shared Output Devices
- Shared and Un-Shared Devices in the Patch
- Removing Shared Devices
- If the Sharing Host Becomes Unavailable
- Share Preamp Control
- Servers
- External Control Devices
- Setting Sample Rate
- Assigning I/O Devices Manually
- Working Offline
- Mixer Settings
- User Interface Settings Section
- Patch Window Sections
- The Patch Grid
- Mixer Layers
- Mixer Channels
- Mixer Layer Modes
- Using Plugins
- Monitor Panel
- INCORPORATING MIDI
- MACKIE CONTROL PROTOCOL
- Setting Up Mackie HUI in a DAW
- Setup Window Overview
- Part 4: Patch Window
- Part 5: Mixer Window
- Appendix
Part 2 Top Bar
SoundGrid Studio/ User Guide
21
Window Select Tabs
Each window has its own control sections that vary according to the function of the window.
MIXER WINDOW
The Mixer window is inspired by traditional mixing consoles, so this is
probably the most familiar view. It provides a broad, multichannel view of
the entire mixer: input, routing, plugins, assignments, and channel
parameters.
P
ATCH WINDOW
The Patch window establishes connections within the mixer, between the
mixer and I/O devices, and between assigned devices on the SoundGrid
network. It provides a comprehensive, detailed tool for patching the
mixer and presents a wide overview of the mixer’s condition so that you
can quickly understand its configuration.
SETUP WINDOW
The Setup window provides the tools to configure SoundGrid devices.
• SoundGrid network setup
• I/O devices assignment
• Server assignment
• Mixer configuration
• User interface setup
• User-defined shortcut keys