SoundGrid Studio User Guide / Owners Manual
Table Of Contents
- Welcome to SoundGrid Studio
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Setup Window Overview
- Network Controls
- Device Racks: Assigning and Managing Network Devices
- I/O Devices Racks
- I/O Device Racks Displays and Controls
- I/O Devices Menu Items
- SG Connect
- I/O Sharing
- Connected Systems
- System Inventory in Super Systems
- Sharing a Device
- Setting up Device Sharing
- Shared Devices: Clocking Considerations
- Patching Shared Devices
- Patching Shared Output Devices
- Shared and Un-Shared Devices in the Patch
- Removing Shared Devices
- If the Sharing Host Becomes Unavailable
- Share Preamp Control
- Servers
- External Control Devices
- Setting Sample Rate
- Assigning I/O Devices Manually
- Working Offline
- Mixer Settings
- User Interface Settings Section
- Patch Window Sections
- The Patch Grid
- Mixer Layers
- Mixer Channels
- Mixer Layer Modes
- Using Plugins
- Monitor Panel
- INCORPORATING MIDI
- MACKIE CONTROL PROTOCOL
- Setting Up Mackie HUI in a DAW
- Setup Window Overview
- Part 4: Patch Window
- Part 5: Mixer Window
- Appendix
Part 2 Top Bar
SoundGrid Studio/ User Guide
20
Copying Channel Information
Use the Preset menu to copy an entire channel, or specific channel settings, to another channel.
COPYING CHANNELS WITHIN A SESSION
1. Select a channel and choose Copy from the Preset menu.
2. Select the target channel. Click Paste.
3. Select what to replace and what to leave unchanged. Choose Select All to paste all channel
settings.
4. Select the import parameters and click OK. Parameters that are not selected in the list will
not be altered in the target channel.
The Preset Scope function can modify these settings:
• Plugin racks and their contents, including presets
• Pan and fader positions
• Digital trim levels
• Aux channel settings
• Group assignments
The Preset Scope function does not modify these settings:
• Input and output patching
• Preamp settings