SoundGrid Studio User Guide / Owners Manual
Table Of Contents
- Welcome to SoundGrid Studio
- Part 1: Getting Started
- Part 2: Top Bar
- Part 3: Setup Window
- Setup Window Overview
- Network Controls
- Device Racks: Assigning and Managing Network Devices
- I/O Devices Racks
- I/O Device Racks Displays and Controls
- I/O Devices Menu Items
- SG Connect
- I/O Sharing
- Connected Systems
- System Inventory in Super Systems
- Sharing a Device
- Setting up Device Sharing
- Shared Devices: Clocking Considerations
- Patching Shared Devices
- Patching Shared Output Devices
- Shared and Un-Shared Devices in the Patch
- Removing Shared Devices
- If the Sharing Host Becomes Unavailable
- Share Preamp Control
- Servers
- External Control Devices
- Setting Sample Rate
- Assigning I/O Devices Manually
- Working Offline
- Mixer Settings
- User Interface Settings Section
- Patch Window Sections
- The Patch Grid
- Mixer Layers
- Mixer Channels
- Mixer Layer Modes
- Using Plugins
- Monitor Panel
- INCORPORATING MIDI
- MACKIE CONTROL PROTOCOL
- Setting Up Mackie HUI in a DAW
- Setup Window Overview
- Part 4: Patch Window
- Part 5: Mixer Window
- Appendix
Appendix
SoundGrid Studio/ User Guide
114
MACKIE CONTROL PROTOCOL
The mixer can be controlled with any control surface device using a Mackie Control protocol option. Some controllers support
several protocols, so it’s important to confirm that the device is set to the Mackie Protocol Mode. There are also tablet
applications that emulate controllers using Mackie Control protocol. Consult the user guide of your control surface.
Control protocols are assigned and removed in the Control rack of the System Inventory
page. Select the Mackie protocol from the drop-down menu. Click on the Gear button to
open the Mackie Control Surface Options panel.
The SoundGrid Studio / Mackie protocol provides for two control devices.
For each, select an input and output port. The selected device appears in
the MIDI devices/port window.
A single MIDI port will map 8 faders at a time; using two ports will allow
for 16 faders at a time.