User Guide

DiGiGrid IOC / User Guide
4
Hardware and Connections
DiGiGrid IOC is a 1U rack-mounted device. Aside from headphone jacks, all connections are on the rear panel.
IOC FRONT PANEL
Input clipping Red = clipping (level can be set through the control panel)
Input signal present Green = signal present
48V phantom power Orange = ON
Network status indicator
Blue: device recognized by the SoundGrid network
Red (flashing): device not recognized by the SoundGrid network Yellow: updating
White: unit malfunction (e.g., firmware did not load properly, unit did not boot properly)
Cycling through colors: This LED is used to identify the unit from the control panel
Power switch/indicator
Two ¼-inch TRS headphone jacks with individual volume control knobs (range8–600 ohms; gain = OFF to +15 dB)