User Guide

DiGiGrid IOC / User Guide
16
Inputs: To gain access to the SRC button, select any of the AES/EBU inputs. Use the SRC button to enable input sample
rate conversion. When SRC is selected, the IOC converts the incoming digital stream to the sample rate of the clock to which
the device is locked. A yellow light on the channel button indicates that sample rate conversion is active for that channel.
DIGITAL SECTION
There are two types of digital inputs/outputs for you to select from: AES/EBU and ADAT.
Upon selection, a higher-resolution meter will appear in the Focus section.
In the AES/EBU section, sample conversion rate (SRC) can be selected independently for inputs
and for outputs.
Inputs and outputs are each divided into two groups: 1-2 and 3-16. Each group is internally linked,
so that changing the sample rate for Input 1 will also change the sample rate for Input 2; changing
the sample rate for Output 3 will change the sample rate for Outputs 4-16.
Outputs: To gain access to the SRC button, select any of the AES/EBU outputs. Once you
select SRC, you can also choose any of the following sample rates: 44.1, 48, 88.2 or 96.