User Guide

Renaissance Channel / User Guide
21
COMPRESSOR SIDECHAIN SECTION
Click the orange SC tab to access the compressor sidechain
section. The controls are identical to those of the gate sidechain,
which are explained earlier, in the Gate section.
COMPRESSOR SIDECHAIN GRAPHIC DISPLAY
When the compressor sidechain is active, its curve appears in the
graph as an orange line above an orange shaded area.
Output and Signal Flow Section
SIGNAL PATH ROUTER
Selects the signal path direction between the EQ and Dynamics sections. By default, the EQ section is
before the Dynamics section and the output of the plugin is that of the dynamics, with its clip guard limiter
(before the output fader). If you swap the signal flow direction, the output of the EQ section will be the
plugin output (again, before the output fader).
OVERALL ATTENUATION METER
The Overall Attenuation Meter shows how much gain reduction is applied by the entire dynamics section. It
shows the total attenuation at any instance from the Compressor, Gate, and Clip Guard.
PHASE REVERSE
Reverses the phase of the plugin output.
Range: In or Out; Default: Out