User Manual
Table Of Contents
- Table of Contents
- Chapter 1 - Introduction
- Chapter 2 - Quickstart Guide
- 2.1 Connect Your Console to the Sound Card or External I/O
- 2.2 Create a New Session and Set the Preferences
- 2.3 Add Empty Racks
- 2.4 Add Plug-ins for Sound Processing
- 2.5 Snapshots
- 2.6 Create Processing Groups
- 2.7 Saving in MultiRack
- 2.8 Recall Safe Mode
- 2.9 Overview Window: Viewing the Status of All of Your Racks
- 2.10 Controlling MultiRack with MIDI
- 2.11 Show Mode
- 2.12 Shortcuts That Are Always Available
- 2.13 Automatic Recovery
- Chapter 3 - MultiRack Windows and Controls Explained
- Chapter 4 - MultiRack Menus
44
st
ort may require.
bose
tput file is titled “DebugMultiRack_date<dd.mm.yyyy>.txt.
oad application in last View mode If you want MultiRack to remember the last mode
re in, choose this option.
o
open with the last session you used when you exit
Open in Full Screen mode Selecting this option w
Screen mode.
Control Setup Tab
• MultiRack
lected
IDI
• snapshot recall
determines which MIDI channel (none;
1-16) will be used to initiate/recall stored
Snapshots. MultiRack will recall
Snapshots #1-128 on receiving MIDI
program change messages (#0-127) on
the set MIDI channel.
Recall first Snapshot when Session loads. If you regularly start your shows with the fir
Snapshot, this is a good choice.
Enable verbose log. This option places MultiRack in a “debug” mode that outputs what is
called a “verbose data file”. It’s used to collect data that technical supp
When selected, the message area of the Status Bar displays a flashing message: “Ver
Output.” The ou
L
(Show/Setup) you we
u select this option, MultiRack will always
ed the application.
ill cause MultiRack to open in Full
Use this page to control how
Load last session on application launch If y
interacts with outside MIDI controllers.
MIDI In and MIDI Thru display all MIDI
ports available to the application.
MultiRack receives MIDI on its se
MIDI In ports and echoes incoming M
to selected MIDI Thru ports.
Set MIDI channel for