User Manual

Recall Safe
Places the selected Rack or plug-in into a “safe” mode
that protects it from Snapshot recalls. Recall Safe
Racks or plug-ins are unaffected by all Snapshot
recalls, even if a Snapshot has parameters that
should be changed on Snapshot recall This command
is allowed only when Recall Safe Mode is selected in
the Snapshots menu.
Assign the Rack to
a processing group
Presents a list of available processing groups from
which to choose.
Switch Rack type
Allows you to change the Rack configuration (mono,
stereo, mono-to-stereo).
Input and Output Sections
At the far left of a Rack is its Input Rail, where audio is selected from
outside sources. Here you choose an input source, and indicate mono or
stereo.
To the right of the Input Rail is the Input Audio Fader, with a range of ±18dB.
On the far right side of each Rack are the Output Rail and the Output Audio Fader. Rack
audio input and output levels are stored within Snapshots.
Each Rack can be connected to input and output channels as follows:
• A mono Rack can connect to a single input channel and a single output channel.
• A stereo Rack can connect to a consecutive-pair of input channels and a consecutive-
pair of output channels.
• A mono-to-stereo Rack can connect to a single input channel and to a consecutive-pair
(starting with odd) output channels.
• A physical input channel can be connected to more than a single Rack, feeding them
simultaneously.
32