User Manual

Remotely Triggering Snapshots
Assign hardware switches to control the Previous and Next Snapshot function.
When using remote MIDI control to scroll to a Snapshot, the Snapshot will
become active immediately.
By creating Hot Snapshots, you can assign up to eight Snapshots to specific MIDI switches.
This is useful for very important or frequently used Snapshots.
In the Snapshots pane, select a Snapshot you want to make Hot. Right click on the
Snapshot name and choose a Hot Snapshot number from the pull-down menu. Once you
create a hot Snapshot, the assignment procedure is the same as with other MIDI trigger
assignments. Hot Snapshots are displayed in red in the Snapshots Pane and their Hot
Snapshot number is indicated on the right side of the window.
Hot Plug-in Mode
You can designate up to eight plug-ins as “Hot Plug-ins.” Hot Plug-ins can be directly
recalled via MIDI, in much the same way that Hot Snapshots are used. To make a plug-in
Hot:
• Select Hot Plug-in Mode from the Edit menu
• Select a plug-in you want to designate as hot.
• Right click on the plug-in and choose a Hot Plug-in number (1-8) from the submenu
Set a Hot Plug-in
20
Plug-in
e
ce.
The plug-in will now display a numbered
marker (H1, H2, …) indicating its Hot
designation.
Once you complete th
assignments, save the MIDI/Keyboard Setup
file, using the Save or Save As… buttons at
the bottom of the interfa
You are now finished with the Remote Controller Editor and may close the application.