User manual

® Waves System V 1.1 - 2011
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual
4 - First use
Before to use the Flash MPX HD, you need to make some adjustments like video resolution, network
parameters...
1 - Connect Flash MPX HD on a screen and insert a USB flash drive. Connect PSU and switch on. Power
LED is on and you can see a first welcome page during few seconds. The complete boot is about 30
seconds then another static page is displayed if no file are playing in autoplay mode.
2 - Using remote control, select «setup» and change the parameters you want.
Note : By default, Flash MPX HD is set to 720p. If your screen is not compatible, change the video output
in the setup menu.
In some case, you can’t see the image and you can’t go in the setup menu. You can use the «TV Mode»
key on the remote control to change resolution.
Vidéo
12V PSU
USB flash drivre
First welcome page
Wait page
- 7 -