User manual

® Waves System V 1.1 - 2011
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual
SPDIF digital audio out:
Digital audio out using TOSLINK fiber optic cable. Connect this into digital audio processor unit using fiber
optic cable. The Flash MPX HD will pass through digital audio including AC3 stereo and Dolby 5.1.
Dry contact inputs: you can connect push buttons, presence, light and smoke detectors, heat sensors,
pressure probes… to the input to trigger the player if a specific event occurs. See the usage description
in this manual. Briefly make contact between one of the 3 inputs and the ground G. You can also combine
the 3 inputs to obtain up to 7 possibilities. It is recommended to use a diodes or external control electronics
or double contact push button
RS485 Serial link: The Flash MPX HD can be operated through a PLC, a computer or a remote control
using the serial link. The player receives information on its Rx input. A specific protocol is provided in this
manual.
If you use RS232 link, you can use a simple RS232->RS485 adaptator
Power supply unit: We recommend to use the PSU supplied with the player. If you want to power your
player from another power supply unit, it must be in 12V DC.
- 5 -