User manual

® Waves System V 1.1 - 2011
I.D. AL - FLASH MPX HD - Full HD video Player - User Manual
- 13 -
And here is an example of the memory card in fast mode:
Example USB drive:
Myvideo.mpg
fastmode.txt
And here is the content of the fastmode.txt:
000=00,100
001=100,140
002=140,260
003=260,320
Explanation:
If fastmode.txt is present, player is in Fast Mode (important: lower case letters only)
000=00,100
000 is the main loop file. This line 000 will automatically loop after powering up. (-> Garden.mpg)
The player will automatically loop line 000 after powering up. It will loop between 0 secs and 100 secs.
Input 000 plays from 0 sec to 100 seconds, total playtime is 100 seconds.
001=100,140
If input 1 is triggered, player will instantly jump to 100 second and play to 140 second. At 140 secs, player
will return to loop line 000. Input 1 plays from 100 sec to 140 seconds, total playtime is 40 seconds.
002=140,260
If input 2 is triggered, player will instantly jump to 140 second and play to 260 second. At 260 second
player will return to loop line 000. Input 2 plays from 140 sec to 260 seconds, total playtime is 120
seconds.
003=260,320
If input 3 is triggered, player will instantly jump to 260 second and play to 320 second. At 320 second,
player will loop back line 000. Input 3 (combine 1 + 2) plays from 260 sec to 320 seconds, total playtime
is 60 seconds.
6.2.2 Optional parameters (Fast mode)
- If input does not have any code, the player will play this input from start to endtime and automatically
return to line 000.
- If the input has code X, then after playing from start to endtime it will pause and wait for another input.
It will not return to play line 000.
- If the input has code N, it will play with No Interruption. While playing it will ignore other input.
After playing from start to endtime, the player will automatically return to play line 000.
- If the input has code L it will LOOP this video segment from start to endtime.