User Manual
15
SUPPLIES
• Thrift store find - 3 drawer dresser
• Waverly Inspirations - Cashew
• Waverly Inspirations - Ink
• Waverly Inspirations Chalk and Wax Brush Combo
• 12˝ x 12˝ Waverly Inspirations Decor Stencil - Mini Geo
• Waverly Inspirations Stencil Brush Set
• Waverly Inspirations Clear Wax
• Waverly Inspirations
• Refer to page 4 for miscellaneous supplies,
plus screwdriver (used to remove hardware)
INSTRUCTIONS
1. Create a smooth painting surface by removing all
drawer hardware using a screwdriver; set aside
hardware until project is complete. Remove drawers
from the chest.
2. Clean surfaces with household glass cleaner to
remove dust, dirt and grease deposits on the surface.
3. Pour a small amount of Waverly Inspirations Chalk –
Cashew into a foam bowl as a palette or load a Waverly
Inspirations Chalk Brush directly from the paint bottle.
4. Apply the paint to the exterior of the chest.
5. Prepare the drawer fronts with an application of
Waverly Inspirations Chalk – Ink; clean chalk brush then
allow surface to dry two hours. (photo 1)
6. When dry, lightly sand smooth using fine grit
sandpaper. Wipe with a tack cloth to remove sanding
dust, then reapply second applications of both Cashew
and Ink. Allow to dry two hours.
7. Working with one drawer front at a time, stencil
Waverly Inspirations Mini Geo design. Begin by
measuring to find the center of each drawer front and
mark with a pencil. Position the center of the stencil
directly over the center mark; secure in place with
stencil tape.
8. Using a dry brush technique, load a Waverly Inspirations
Stencil Brush with Cashew by dipping the stencil brush
into a small puddle of Cashew, then offload excess
paint onto a paper towel. Begin stenciling using a
circular clockwise/counter-clockwise motion until the
entire design area has been stenciled. (photo 2) Lift to
reveal the design. (photo 3) To complete the stenciled
drawer front design, reposition the stencil to the right of
the center stenciled design, align the stencil, tape in
place, then stencil. Repeat for the left side of the drawer
front. Then complete for each of the drawer fronts until
all have been stenciled. Allow to dry 24 hours.
9. To seal and protect the dresser, apply an even coat of
Waverly Inspirations Clear Wax using the Wax Brush;
allow to dry overnight. Using a soft, lint-free cotton
cloth, buff to desired sheen.
10. Replace drawer hardware. Allow seven days for curing
before using heavily.
TIPS & TRICKS
• When stenciling, it is always best to use the dry
brush technique referring to a stencil brush that
has been loaded with paint and then offloaded so
the brush bristles are almost dry. Stenciling with a
“too-wet” brush can create paint smudges under
the stencil design.
• Although Waverly Inspirations Chalk dries to the
touch fairly quickly on the project surface, it is
always important to allow thorough dry times
allowing all moisture to evaporate.
• Try something new, create a time worn stenciled
look. After stenciling, sand to distress the project
surface including the drawer front edges creating
the illusion that this project had been artistically
created many years ago.
14
1 2 3
Waverly Inspirations Fabric
GEO MODERN DRESSER
by Julie Lewis
The clean straight lines of this three drawer dresser combine well with the modern
graphics of the Waverly Inspirations Mini Geo stencil. Together the straight lines
and modern style stencil create the perfect decorated dresser offering storage with
a stylish design. When using any color combination of Waverly Inspirations Chalk,
easy-to-achieve professional looking results are possible!