User`s guide

Using the Front Panel
3–6 MS-4900, Rev. A
Choose
Operation:
Set Features
Set Local Time
The first screen within the Set Features topic allows you to set the time that this
receiver will use to log messages and events.
Press SELECT once to display this screen:
Press SELECT again to display this screen:
1. Use the <> buttons to increment or decrement the hours (hh)
2. Press SELECT to set your entry. The cursor jumps to the minutes field (mm).
3. Set the minutes fields in the same way.
4. After entering the minutes, press SELECT to activate the time.
5. Press CANCEL twice to return to the main topics.
NOTE: Local time is lost if power to the IDR V1000 is interrupted. The clock
automatically resets to 00:00 and counts from that time, unless you re-
establish local time through these screens.
Choose
Operation:
Device Restart
Press SELECT from the Device Restart main topic to reset the logical receiver
assigned an asynchronous output port. The second screen, accessed with the >
button, clears any data stored in the received-data buffer.
These commands are useful if the port or device connected to the port suddenly stops
passing data. You can reset an individual port without resetting the entire IDR
V1000.
Set Time
hh:mm
Specify:
Local Time