User`s guide

Using the Front Panel

3–4 MS-4900, Rev. A

Choose

Operation:

Specify Setup

Press SELECT from the Specify Setup main topic. Then use the < > buttons to

access screens for the following purposes:

• Change output port configuration settings

• Enable or disable a screen login

• Enter a password to restrict access to certain screens

• Enable or disable a screen lock

• Enter or change IP addresses (Ethernet model only)

CAUTION: Changes you enter on these screens are not visible to the network

operator and could be reset with a network download, possibly

interrupting site operation. It is a good idea to record (and report to

the network operator) important changes you make to parameters

onsite, in case you need to re-install those settings.

To Enable or

Disable a Screen

Enabling the login requires a user to enter a password to access any IDR V1000

screens where parameters can be modified. (The Set Features screen can still be

changed and all settings can still be viewed without entering a password.)

Use the > button to access this screen:

Press SELECT to display this screen:

1. Use the < > buttons to change from “no” to “yes”.

2. Press SELECT to set the entry.

3. Enter your password.

4. Press CANCEL twice to return to the main topics

NOTE: You must enable the screen login if you want to use the Logoff function to

turn off asynchronous data output (from the main topic Logoff).

3N Y

Specify:

Enable Login