User`s guide

Using the Front Panel

MS-4900, Rev. A 3–3

Choose

Operation:

Show Status

Press SELECT from the Show Status main topic to access the following displays:

• Logical receiver activity

• “Summary” screen of active stat mux sessions and memory utilization

• “Superscreen” data (stat mux status, data errors, packets received, lock on carrier)

• AGC and E

reading (demodulator status)

• Network control channel activity, carrier ID, cluster (group) number

NOTE: For information on interpreting these screens, refer to Section 4.

Choose

Operation:

View Setup

Press SELECT from the View Setup main topic to access the following displays:

• Current communications parameters for each asynchronous serial port (baud

rate, flow control, etc.)

• Pools, groups, PVC assignments for stat mux channels

• Time of the latest network download to each logical receiver

• IP address (for the Ethernet model only)

• IDR V1000 software version; modulation type

• Password login and screen lock requirements

• TDM channels assigned to the IDR V1000 output paths.

NOTE: You cannot modify parameter settings within the View Setup screens. For

information on interpreting these screens, refer to Section 4.