User`s guide

Installing the IDR V1000
2–2 MS-4900, Rev. A
Step 1:
Connect
The Cables
1. Connect the coaxial cable to the RF Input connector
2. Connect data cables between the serial or Ethernet outputs on the IDR V1000
and the external devices. See Figures 2-1 and 2-2.
3. Connect the power module to the IDR V1000 power input and to the power
source.
Figure 2-1. Rear Panel Connectors, 4-Port Daughtercard
Figure 2-2. Rear Panel Connectors, Ethernet Output