User Manual

Introduction
________________________________
_______________
Boomer II User Manual & Integrator’s Guide
Wavenet Technology 8 BM210012WT09
Features
The Boomer II OEM modem is approximately the size of a credit card
and just 9mm thick. The modem is easily connected to many other
devices and can be incorporated into a variety of package formats. The
modem has a TTL serial port.
The Boomer II OEM Modem has the following features:
q Serial communications interface port (TTL level)
running an NCL protocol
q Indicator lights shows the status of the network coverage and
power supply
q Four configurable digital input/output lines for external
control/monitoring
q Software configurable RF calibration adjustments to suit
specific networks
q High sensitivity reception
q Small footprint and low profile design
q Low-voltage and low standby current consumption for battery
based products
q Auto-wake up of host on incoming messages
q Roaming capabilities as used in DataTAC system
q Modem is always online using the DataTAC network
q Easy to install, service and update
Applications
Suitable devices in which the Boomer II OEM Modem can be used
include the following applications:
Meter Reading
The modem can be used to read billing information from intelligent
electrical meters and basic disc meters. Data is transmitted wirelessly
through a radio network to billing computers.
EFTPOS
The modem can perform handshaking and complete verification of all
data transmitted through the wireless network.
Vending Machines
Vending machines can also utilise radio data technology. Many
machines already transmit usage and refill requirements to company
head offices via standard telephone lines. Radio modems allow vending
machines to be placed in areas with poor access to telecommunications
infrastructure, providing a cost-effective alternative to installing new
telephone lines. On refilling, only the required refills will be